View HD74UH4066NBSP_208850.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74UH4066
Analog Switch
ADE-205-022A (Z) 2nd. Edition Aug. 1993 Description
The HD74UH4066 is high speed CMOS analog switch using silicon gate CMOS process. With CMOS low power dissipation, it provides high speed. The device has low ON resistance for good transfer characteristics and can take wide range of input voltage.
Features
* Encapsulated in very small 5pins package of 2.9 x 1.6 x 1.1 mm, the efficiency to mount on substrate is significantly improved. * The basic gate function is lined up as hitachi uni logic series. * Supplied on embos taping for high speed automatic mounting. * Electrical characteristics equivalent to the HD74HC4066 Supply voltage range: 2 to 6 V Operating temperature range: -40 to +85C * | IOH | = IOL = 2 mA (min)
Pin Arrangement
IN/OUT 1
5
VCC
OUT/IN 2
GND
3
4 Control
(Top view)
HD74UH4066
Article Indication
Type name Lot number
H
9
A
Absolute Maximum Ratings
Item Supply voltage Input voltage Output voltage Input diode current Output diode current Output current VCC/GND current Power dissipation Strage temperature Symbol VCC VIN VOUT I IK I OK I OUT I CC, I GND PT Tstg Ratings -0.5 to +7.0 -0.5 to VCC +0.5 -0.5 to VCC +0.5 20 20 25 25 200 -65 to +150 Unit V V V mA mA mA mA mW C
Recommended Operating Conditions
Item Supply voltage Input voltage Output voltage Operating temperature Input rise/fall time Symbol VCC VIN VOUT Topr t r, t f Ratings 2 to 6 0 to V CC 0 to V CC -40 to +85 0 to 1000 (VCC = 2.0 V) 0 to 500 (VCC = 4.5 V) 0 to 400 (VCC = 6.0 V) Unit V V V C ns
2
HD74UH4066
Electrical Characteristics
Ta = 25C Item Input voltage Symbol VIH Min 1.5 3.15 4.2 VIL -- -- -- On resistance RON -- -- -- Leak current IS (off) IS (on) Input current Operating current I IN I CC -- Typ -- -- -- -- -- -- Max -- -- -- 0.5 1.35 1.8 Ta = -40 to 85C Min 1.5 3.15 4.2 -- -- -- Max -- -- -- 0.5 1.35 1.8 6250 250 210 1.0 A V Unit V Test Conditions VCC 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 6.0 VC = VIH VIN = 0 to VCC I IN/OUT = 1 mA VC = VIL VIN = VCC, VOUT = GND or V IN = GND, VOUT = VCC VC = VIH VIN = VCC or GND VIN = VCC or GND VIN = VCC or GND
2000 5000 -- 100 60 -- 200 170 0.1 -- -- --
-- -- --
-- -- --
0.1 0.1 1.0
-- -- --
1.0 1.0 10.0
A A A
6.0 6.0 6.0
3
HD74UH4066
Switching Characteristics
Ta = 25C Item Symbol Min -- -- -- Output enable time t PZL t PZH -- -- -- Output disable time t LZ t HZ -- -- -- Maximum control frequency t max -- -- -- Control input capacitance Switch I/O capacitance Feed through capacitance Power dissipation capacitance CIN CIN/OUT CIN-OUT CPD -- -- -- -- Typ -- 4 -- -- 10 -- -- 14 -- 20 30 30 5 6 0.5 13 Max 50 10 9 115 23 20 115 23 20 -- -- -- 10 -- -- -- Ta = -40 to 85C Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max 65 13 11 145 29 25 145 29 25 -- -- -- 10 -- -- -- pF pF pF pF MHz ns ns Unit ns Test Conditions VCC 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 RL = 1 K RL = 1 K RL = 10 K
Propagation delay time t PLH t PHL
4
HD74UH4066
Test Circuit
RON
VCC VC =VIH VCC VIN =VCC (ON) GND VOUT RON =
VIN-OUT 10 -3
()
+
1.0 mA
--
V
VIN-OUT
IS (OFF), IS (ON)
VCC VC =VIL VCC A VIN =VCC or GND (OFF) GND VOUT =GND or VCC VIN =VCC or GND A VC =VIH VCC (ON) GND VOUT OPEN VCC
tPLH, tPHL
VCC VC =VIH VCC VIN (ON) GND RL= 10 k VOUT CL= 50 pF VOUT VIN tr 90% 50% t PLH 50% VOL tf VCC 10% t PHL GND VOH
5
HD74UH4066
tZH, tZL / tHZ, tLZ
VCC
VC VCC GND
R L k =1 VC VOUT CL=50 pF RL =1 k S2
tr 90% 50% t ZH 50% VOUT
tf VCC 10% t HZ 90% VOH VOL GND
S1
VIN
t ZL 50%
t LZ 10%
VOH VOL
Item tZH tZL tHZ tLZ
S1 VCC GND VCC GND
S2 GND VCC GND VCC
Maximum control frequency
VCC VC VC VCC VIN =VCC GND VOUT RL= 1 k CL=15 pF VOUT VCC /2 VCC GND
6
HD74UH4066
CIN/OUT, CIN-OUT
CIN-OUT
VC =GND
VCC
VCC (OFF) CIN/OUT GND CIN/OUT
7
HD74UH4066
Package Dimensions
Unit: mm
1.9 0.2 0.95 0.95 0.6
0.16
+ 0.1 - 0.05
+ 0.2 0.6 1.6 - 0.1
5 - 0.4 - 0.05 2.9 0.2
0.3
+ 0.1
+ 0.2 1.1 - 0.1
2.8
+ 0.2 - 0.3
0 - 0.1
Hitachi Code JEDEC EIAJ Mass (reference value)
MPAK-5 -- -- 0.015 g
8
HD74UH4066
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica Europe Asia Japan
: : : :
http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk
For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160
Copyright (c) Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Colophon 2.0
9

▲Up To Search▲

Price & Availability of HD74UH4066NBSP

	To Download HD74UH4066NBSP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .